Product Details:

Parts for two high power research lasers. Many of these parts are listed on a specification sheet titled 1 KW Laser (PDF above). Listed parts include the chamber, end walls, and bottom plate which already has electrode rails mounted and the Alumina Ceramics wedges to line the plasma chamber walls. This lot has two chamber bodies, three very large pieces of Alumina Ceramic, a rail kit, a couple of polycarbonate end walls, and two aluminum end walls. This is not a complete kit for either laser, but is valued at over $15,000 in parts for a very good start at building a 1 KW laser valued between $40,000 - $50,000.

 
• 37"L x 6-3/4"W x 4-1/2"H
 
• 33-3/4"L x 6-3/4"W x 4"H

 
• 36.875"L x 5.25"W x 1" *
 
• 36.875"L x 5.25"W x 1"H bottom piece
 
• 36.875"L x 5.25"W x 0.25"H filler piece

 
• 36" long (bottom and two sides) which act as the second electrode as well as hold the Alumina Ceramic to form the plasma discharge area

 
• Polycarbonate end walls
 
• 2 aluminum end walls; one with 2 laser mounts and total reflector mirrors mounted

Product PDFs:
None
None