Cart
Part Number:
(TAP)
P256.18Y
Product Details:
Permacel® 1−Mil Polyester Film
P−252 / P−253 / P−256
Electrical Insulating Tapes 0.187" wide, 4−3/16" diameter, 72 yard roll The universal standard! Engineered for fine wire applications requiring a non−corrosive tape. Thin, conformable, tough, highly tear resistant. Recommended for insulating connections, crossover insulation and barrier insulation on small bobbin wound coils; and for holding layer and barrier insulation on stick wound coils. Widely used for coil end insulation and coil outer protective wraps on stick wound and small form wound coils. Also used for end turn bundling and phase insulation on small sub−fractional horsepower motors.¢ Insulation class: 130ºC
¢ Backing material: 1−mil polyester film
¢ Adhesive: Rubber / resin, thermosetting,
semi−cured
¢ Colors: P−256 Yellow
¢ Total tape thickness: 2.5 mils / 0.063 mm¢ Tensile strength: 25 lbs. per in. /
4.5 kg per cm
¢ Adhesion to steel: 50 oz. per in. /
560 gm per cm
¢ Dielectric strength: 5,500 volts
¢ Length: 72 yards long
Product PDF No PDF available
Part #: FUS 120785
Description: Belfuse fuse cartridge. 7 amp, 125v. 3/4" pigtail…
Brand: Belfuse
Part #: TP NCT-F5
Description: Denkenseiki NCT-F5 transformer. 3 kva. 2 kv insul…
Brand: Denkenseiki
Part #: RCV RV6NAYSL205
Description: Panel bushing mount pot, RV6 style. 2M ohm, 0.5 w…
Part #: TEK 101-0096-00
Description: Tek Decorative Trim / 24xx
Part #: TUR 1007
Description: 1007, Raytheon, Boxed For a $6 up charge ($5 for …
Part #: CFE 043000R00AAN
Description: 1−3/4" x 4−1/4" Unless otherwise noted, tolerance…
Part #: RWF WL5000-10
Description: 5000 ohm 10% 10w Wire Wound Resistor NOTE: Minim…
Part #: RWF L225J150
Description: 150 ohm 5% 225w Ohmite Tubular WW Resistor, Solde…