Cart
Part Number:
(LZR)
WEDCLMP6375
Product Details:
2" W x 3−3/16" L x 0.74" −to− 0.88" H Threaded shaft and nuts included Aluminum wedges when tightened cause the height of the device to increase (similar to a wedge jack). Used to brace inner laser assembly to the housing. Center hole allows piece of allthread and nuts to squeeze wedges together.
Minimum and maximum height measured using 0.1" diameter rod, or included hardware. Some wedge shafts are threaded 1/4−20. All shafts 0.2" diameter.
Product PDF No PDF available
Part #: SIC 74LS109AN
Description: Integrated Circuit SN74LS109AN NOTE: Minimum orde…
Part #: SWP A50
Description: Chicago switch. Normally open.
Brand: Chicago
Part #: CPF 611.3232H160
Description: 2300 pF 160v 2.5% Rohm, 6.3mm D x 15mm L
Part #: VAL 110126
Description: Bell & Gossett ASME relief valve.
Brand: Bell & Gossett
Part #: KO CE15FN3A
Description: Cuttler-Hammer contactor relay. 3PST. Freedom Ser…
Brand: Cuttler-Hammer
Part #: RMF 00001430R0DK
Description: 1430 ohm 1% − RN75B Metal Film Resistor NOTE: Mi…
Part #: CPF 611.3-362H160
Description: 3600 pF 160v 2.5% TRW, 7mm D x 15mm L
Part #: CFE 81D272M080MB5D
Description: 2,700 µF 80v DC UCC Nippon Chemicon Snap−in Cap, …