Development Server - Visit surplussales.com for the live site
0
All Categories | Laser Housing Components | 2" W x 2" L x 0.7" −to− 0.87" H  Opposing Wedge Clamp

2" W x 2" L x 0.7" −to− 0.87" H  Opposing Wedge Clamp

2" W x 2" L x 0.7" −to− 0.87" H  Opposing Wedge Clamp

Part Number:
(LZR) WEDCLMP4000

Product Details:
2" W x 2" L x 0.7" −to− 0.87" H  No hardware, one wedge has two 1−1/8" O.C. countersunk flathead screws Aluminum wedges when tightened cause the height of the device to increase (similar to a wedge jack). Used to brace inner laser assembly to the housing. Center hole allows piece of allthread and nuts to squeeze wedges together.
Minimum and maximum height measured using 0.1" diameter rod, or included hardware. Some wedge shafts are threaded 1/4−20. All shafts 0.2" diameter.


Length at Sq.
2"
Width
2"
Min. Height
0.7"
Max Height
0.87"

Share this page

$95.00

/ each

Qty

FREE Ground Shipping! On orders over $100

Related Products
Amphenol Spectra-Strip Shielded Flat

Part #: WRC 159-2801-026

Description: Amphenol Spectra-Strip jacketed and shielded with…

Brand: Amphenol Spectra-Strip

SDI 1N5226B

Part #: SDI 1N5226B

Description: Zener, 3.3v, 500mw, 20% NOTE: Minimum order is $1…

82 µF 15v Electrolytic Capacitor

Part #: CFE 000082R00AAN

Description: Electrolytic Capacitor 82 µF 15v Axial Sprague 60…

Amp Pins for Power Interconnect Bodies

Part #: CPC 170364-1

Description: Pins for Power Interconnect Bodies Amp Male Male …

Featured Products
189 − 227 µF 110 vac Motorstart Capacitor

Part #: CFO 0227R00.11.B

Description: 189 − 227 µF 110 vac  Wire leads w/ rings Mepco 3…

20 pF Uncased Silver Mica Capacitor

Part #: COL 913-0056-00

Description: 20 pF N1000 Uncased Silver Mica temperature compe…

274 pF 160v Polystyrene Capacitor

Part #: CPF 611.1S-2740H160V

Description: 274 pF 160v 2.5% TRW, 4mm D x 7mm L

Oil Filter

Part #: ATO CF-213

Description: Casite Oil Filter